Lỗi trên bộ điều khiển Fanuc 0i

Lỗi trên bộ điều khiển Fanuc 0i



Lỗi trên bộ điều khiển Fanuc 0i Alarms

Program errors (P/S alarm)

Program errors /Alarms on program and operation (P/S alarm)

Lỗi trên bộ điều khiển Fanuc 0i Phần lập trình

0 PLEASE TURN OFF POWER

1 TH PARITY ALARM

2 TV PARITY ALARM

3 TOO MANY DIGITS

4 ADDRESS NOT FOUND

5 NO DATA AFTER ADDRESS

6 ILLEGAL USE OF NEGATIVE SIGN

7 ILLEGAL USE OF DECIMAL POINT

9 ILLEGAL ADDRESS INPUT

10 IMPROPER G–CODE

11 NO FEEDRATE COMMANDED

14 CAN NOT COMMAND G95 (M series)

14 ILLEGAL LEAD COMMAND (T series)

15 TOO MANY AXES COMMANDED (M series)

15 TOO MANY AXES COMMANDED (T series)

20 OVER TOLERANCE OF RADIUS

21 ILLEGAL PLANE AXIS COMMANDED

22 NO CIRCLE RADIUS

23 ILLEGAL RADIUS COMMAND (T series)

25 CANNOT COMMAND F0 IN G02/G03 (M series)

27 NO AXES COMMANDED IN G43/G44 (M series)

28 ILLEGAL PLANE SELECT

29 ILLEGAL OFFSET VALUE (M series)

29 ILLEGAL OFFSET VALUE (T series)

30 ILLEGAL OFFSET NUMBER (M series)

30 ILLEGAL OFFSET NUMBER (T series)

31 ILLEGAL P COMMAND IN G10

32 ILLEGAL OFFSET VALUE IN G10

33 NO SOLUTION AT CRC (M series)

33 NO SOLUTION AT CRC (T series)

34 NO CIRC ALLOWED IN ST–UP /EXT BLK (M series)

34 NO CIRC ALLOWED IN ST–UP /EXT BLK (T series)

35 CAN NOT COMMANDED G39 (M series)

35 CAN NOT COMMANDED G31 (T series)

36 CAN NOT COMMANDED G31 (M series)

37 CAN NOT CHANGE PLANE IN CRC (M seires)

37 CAN NOT CHANGE PLANE IN NRC (T seires)

38 INTERFERENCE IN CIRCULAR BLOCK (M seires)

38 INTERFERENCE IN CIRCULAR BLOCK (T series)

39 CHF/CNR NOT ALLOWED IN NRC (T series)

40 INTERFERENCE IN G90/G94 BLOCK (T series)

41 INTERFERENCE IN CRC (M seires)

41 INTERFERENCE IN NRC (T seires)

42 G45/G48 NOT ALLOWED IN CRC (M series)

44 G27–G30 NOT ALLOWED IN FIXED CYC (M series)

45 ADDRESS Q NOT FOUND (G73/G83) (M series)

46 ILLEGAL REFERENCE RETURN COMMAND

47 ILLEGAL AXIS SELECT

48 BASIC 3 AXIS NOT FOUND

049 ILLEGAL OPERATION (G68/G69) (M series)

50 CHF/CNR NOT ALLOWED IN THRD BLK (M series)

50 CHF/CNR NOT ALLOWED IN THRD BLK(T series)

51 MISSING MOVE AFTER CHF/CNR (M series)

51 MISSING MOVE AFTER CHF/CNR (T series)

52 CODE IS NOT G01 AFTER CHF/CNR (M series)

52 CODE IS NOT G01 AFTER CHF/CNR (T series)

53 TOO MANY ADDRESS COMMANDS (M series)

53 TOO MANY ADDRESS COMMANDS (T seires)

54 NO TAPER ALLOWED AFTER CHF/CNR (T series)

55 MISSING MOVE VALUE IN CHF/CNR (M series)

55 MISSING MOVE VALUE IN CHF/CNR (T series)

56 NO END POINT & ANGLE IN CHF/CNR (T series)

57 NO SOLUTION OF BLOCK END (T series)

58 END POINT NOT FOUND (M series)

58 END POINT NOT FOUND (T series)

59 PROGRAM NUMBER NOT FOUND

60 SEQUENCE NUMBER NOT FOUND

61 ADDRESS P/Q NOT FOUND IN G70–G73 (T series)

62 ILLEGAL COMMAND IN G71–G76 (T series)

63 SEQUENCE NUMBER NOT FOUND (T series)

64 SHAPE PROGRAM NOT MONOTONOUSLY (T series)

65 ILLEGAL COMMAND IN G71–G73 (T series)

66 IMPROPER G–CODE IN G71–G73 (T series)

67 CAN NOT ERROR IN MDI MODE (T series)

69 FORMAT ERROR IN G70–G73 (T series)

70 NO PROGRAM SPACE IN MEMORY

71 DATA NOT FOUND

72 TOO MANY PROGRAMS

73 PROGRAM NUMBER ALREADY IN

74 ILLEGAL PROGRAM NUMBER

75 PROTECT

76 ADDRESS P NOT DEFINED

77 SUB PROGRAM NESTING ERROR

78 NUMBER NOT FOUND

79 PROGRAM VERIFY ERROR

80 G37 ARRIVAL SIGNAL NOT ASSERTED (M series)

80 G37 ARRIVAL SIGNAL NOT ASSERTED (T series)

81 OFFSET NUMBER NOT FOUND IN G37 (M series)

81 OFFSET NUMBER NOT FOUND IN G37 (T series)

82 H–CODE NOT ALLOWED IN G37 (M series)

82 T–CODE NOT ALLOWED IN G37 (T series)

83 ILLEGAL AXIS COMMAND IN G37 (M series)

83 ILLEGAL AXIS COMMAND IN G37 (T series)

85 COMMUNICATION ERROR

86 DR SIGNAL OFF

87 BUFFER OVERFLOW

88 LAN FILE TRANS ERROR (CHANNEL–1)

89 LAN FILE TRANS ERROR (CHANNEL–2)

90 REFERENCE RETURN INCOMPLETE

91 REFERENCE RETURN INCOMPLETE

92 AXES NOT ON THE REFERENCE POINT

94 P TYPE NOT ALLOWED (COORD CHG)

95 P TYPE NOT ALLOWED (EXT OFS CHG)

96 P TYPE NOT ALLOWED (WRK OFS CHG)

97 P TYPE NOT ALLOWED (AUTO EXEC)

98 G28 FOUND IN SEQUENCE RETURN

99 MDI EXEC NOT ALLOWED AFT. SEARCH

100 PARAMETER WRITE ENABLE

101 PLEASE CLEAR MEMORY

109 FORMAT ERROR IN G08 (M series)

110 DATA OVERFLOW

111 CALCULATED DATA OVERFLOW

112 DIVIDED BY ZERO

113 IMPROPER COMMAND

114 FORMAT ERROR IN MACRO

115 ILLEGAL VARIABLE NUMBER

116 WRITE PROTECTED VARIABLE

118 PARENTHESIS NESTING ERROR

119 ILLEGAL ARGUMENT

122 FOUR FOLD MACRO MODAL–CALL

123 CAN NOT USE MACRO COMMAND IN DNC

124 MISSING END STATEMENT

125 FORMAT ERROR IN MACRO

126 ILLEGAL LOOP NUMBER

127 NC, MACRO STATEMENT IN SAME BLOCK

128 ILLEGAL MACRO SEQUENCE NUMBER

129 ILLEGAL ARGUMENT ADDRESS

130 ILLEGAL AXIS OPERATION

131 TOO MANY EXTERNAL ALARM MESSAGES

132 ALARM NUMBER NOT FOUND

133 ILLEGAL DATA IN EXT. ALARM MSG

135 ILLEGAL ANGLE COMMAND (M series)

135 SPINDLE ORIENTATION PLEASE (T series)

136 ILLEGAL AXIS COMMAND (M series)

136 C/H–CODE & MOVE CMD IN SAME BLK. (T series)

137 M–CODE & MOVE CMD IN SAME BLK.

138 SUPERIMPOSED DATA OVERFLOW

139 CAN NOT CHANGE PMC CONTROL AXIS

140 PROGRAM NUMBER ALREADY IN USE

141 CAN NOT COMMAND G51 IN CRC (M series)

142 ILLEGAL SCALE RATE (M series)

143 SCALED MOTION DATA OVERFLOW (M series)

144 ILLEGAL PLANE SELECTED (M series)

145 ILLEGAL CONDITIONS IN POLAR COORDINATE INTERPOLATION

146 IMPROPER G CODE

148 ILLEGAL SETTING DATA (M series)

149 FORMAT ERROR IN G10L3 (M series)

150 ILLEGAL TOOL GROUP NUMBER

151 TOOL GROUP NUMBER NOT FOUND

152 NO SPACE FOR TOOL ENTRY

153 T–CODE NOT FOUND

154 NOT USING TOOL IN LIFE GROUP (M series)

155 ILLEGAL T–CODE IN M06 (M series)

155 ILLEGAL T–CODE IN M06 (T series)

156 P/L COMMAND NOT FOUND

157 TOO MANY TOOL GROUPS

158 ILLEGAL TOOL LIFE DATA

159 TOOL DATA SETTING INCOMPLETE

160 MISMATCH WAITING M–CODE (T series (At two–path))

160 MISMATCH WAITING M–CODE (T series (At three–path))

160 G72.1 NESTING ERROR (M series))

161 ILLEGAL P OF WAITING M–CODE (T series (three–path control)

161 G72.1 NESTING ERROR (M series)

163 COMMAND G68/G69 INDEPENDENTLY T series (At two–path)

169 ILLEGAL TOOL GEOMETRY DATA (At two–path)

175 ILLEGAL G107 COMMAND

176 IMPROPER G–CODE IN G107 (M series)

176 IMPROPER G–CODE IN G107 (T series)

177 CHECK SUM ERROR (G05 MODE)

178 G05 COMMANDED IN G41/G42 MODE

179 PARAM. (NO. 7510) SETTING ERROR

180 COMMUNICATION ERROR (REMOTE BUF)

181 FORMAT ERROR IN G81 BLOCK (Hobbing machine, EGB) (M series)

182 G81 NOT COMMANDED (Hobbing machine) (M series)

183 DUPLICATE G83 (COMMANDS) (Hobbing machine) (M series)

184 ILLEGAL COMMAND IN G81 (Hobbing machine, EGB) (M series)

185 RETURN TO REFERENCE POINT (Hobbing machine) (M series)

186 PARAMETER SETTING ERROR (Hobbing machine, EGB) (M series)

187 HOB COMMAND IS NOT ALLOWED

190 ILLEGAL AXIS SELECT (M series)

194 SPINDLE COMMAND IN SYNCHRO–MODE

195 MODE CHANGE ERROR

197 C–AXIS COMMANDED IN SPINDLE MODE

199 MACRO WORD UNDEFINED

200 ILLEGAL S CODE COMMAND

201 FEEDRATE NOT FOUND IN RIGID TAP

202 POSITION LSI OVERFLOW

203 PROGRAM MISS AT RIGID TAPPING

204 ILLEGAL AXIS OPERATION

205 RIGID MODE DI SIGNAL OFF

206 CAN NOT CHANGE PLANE (RIGID TAP) (M series)

207 RIGID DATA MISMATCH

210 CAN NOT COMAND M198/M199

211 G31 (HIGH) NOT ALLOWED IN G99

212 ILLEGAL PLANE SELECT (M series)

212 ILLEGAL PLANE SELECT (T series)

213 ILLEGAL COMMAND IN SYNCHRO–MODE

213 ILLEGAL COMMAND IN SYNCHRO–MODE (T series)

214 ILLEGAL COMMAND IN SYNCHRO–MODE

217 DUPLICATE G51.2 (COMMANDS) (T series)

218 NOT FOUND P/Q COMMAND IN G251 (T series)

219 COMMAND G250/G251 INDEPENDENTLY (T series)

220 ILLEGAL COMMAND IN SYNCHR–MODE (T series)

221 ILLEGAL COMMAND IN SYNCHR–MODE (T series)

222 DNC OP. NOT ALLOWED IN BG.–EDIT (M series)

224 RETURN TO REFERENCE POINT (M series)

224 RETURN TO REFERENCE POINT (T series)

225 SYNCHRONOUS/MIXED CONTROL ERROR (T series (At two–path))

226 ILLEGAL COMMAND IN SYNCHRO– MODE (T series (At two–path))

229 CAN NOT KEEP SYNCHRO–STATE (T series)

230 R CODE NOT FOUND (Grinding machine) (M series)

231 ILLEGAL FORMAT IN G10 OR L50

232 TOO MANY HELICAL AXIS COMMANDS (M series)

233 DEVICE BUSY

239 BP/S ALARM

240 BP/S ALARM

241 ILLEGAL FORMAT IN G02.2/G03.2 (M series)

242 ILLEGAL COMMAND IN G02.2/G03.2 (M series)

243 OVER TOLERANCE OF END POINT (M series)

244 P/S ALARM (T series)

245 T–CODE NOT ALOWEE IN THIS BLOCK (T series)

246 ENCODE PROGRAM NUMBER ERROR

247 ILLEGAL CODE USED FOR OUTPUT

250 Z AXIS WRONG COMMAND (ATC) (M series)

251 ATC ERROR (M series)

252 ATC SPINDLE ALARM (M series)

253 G05 IS NOT AVAILABLE (M series)

300 ILLEGAL COMMAND IN SCALING

301 RESETTING OF REFERENCE RETURN IS INHIBITED

302 SETTING THE REFERENCE POSITION WITHOUT DOG IS NOT PERFORMED

304 G28 IS COMMANDED WITHOUT ZERO RETURN

305 INTERMEDIATE POSITION IS NOT ASSIGNED (M Series)

306 MISMATCH AXIS WITH CNR/CHF (T Series)

307 CAN NOT START REFERENCE RETURN WITH MECHANICAL STOPPER SETTING

310 FILE NOT FOUND

311 CALLED BY FILE NAME FORMAT ERROR

312 ILLEGAL COMMAND IN DIRECT DRAWING DIMENSIONS PROGRAMMING (T Series)

313 ILLEGAL LEAD COMMAND (T Series)

314 ILLEGAL SETTING OF POLYGONAL AXIS (T Series)

315 ILLEGAL NOSE ANGLE COMMAND IS IN THE THREAD CUTTING CYCLE (T Series)

316 ILLEGAL CUTTING AMOUNT IS IN THE THREAD CUTTING CYCLE (T Series)

317 ILLEGAL THREAD COMMAND IS IN THE THREAD CUTTING CYCLE (T Series)

318 ILLEGAL RELIEF AMOUNT IS IN THE DRILLING CYCLE (T Series)

319 THE END POINT COMMAND IS ILLEGAL IN THE DRILLING CYCLE (T Series)

320 ILLEGAL MOVEMENT AMOUNT/CUTTING AMOUNT IS IN THE DRILLING CYCLE (T Series)

321 ILLEGAL REPEATED TIME IS IN THE PATTERN REPEATING CYCLE (T Series)

322 FINISHING SHAPE WHICH OVER OF STARTING POINT (T Series)

323 THE FIRST BLOCK OF SHAPE PROGRAM IS A COMMAND OF TYPE II (T Series)

324 THE INTERRUPTION TYPE MACRO WAS DONE IN THE MULTIPLE REPETIVE CYCLES (T Series)

325 UNAVAILABLE COMMAND IS IN SHAPE PROGRAM (T Series)

326 LAST BLOCK OF SHAPE PROGRAM IS A DIRECT DRAWING DIMENSIONS (T Series)

327 MODAL THAT MULTIPLE REPETIVE CYCLES CANNOT BE DONE (T Series)

328 ILLEGAL WORK POSITION IS IN THE TOOL NOSE RADIUS COMPENSATION (T Series)

329 THE FINISHING SHAPE IS NOT A MONOTONOUS CHANGE(SECOND AXES) (T Series)

330 ILLEGAL AXIS COMMAND IS IN THE TURNING CANNED CYCLE (T Series)

334 OFFSET IS OUT OF EFFECTIVE RANGE

336 TOOL COMPENSATION COMMANDED MORE TWO AXES (M Series)

337 EXCESS MAXIMUM INCREMENTAL VALUE

338 CHECK SUM ERROR

345 TOOL CHANGE ILLEGAL Z AXIS POS

346 TOOL CHANGE ILLEGAL TOOL NUM

347 TOOL CHANGE ILLEGAL COMMAND IN SAME BLK.

348 TOOL CHANGE Z AXIS POS NOT ESTABLISHED

349 TOOL CHANGE SPINDLE NOT STOP

350 PARAMETER OF THE INDEX OF THE SYNCHRONOUS CONTROL AXIS SET ERROR. (T Series)

351 BECAUSE THE AXIS IS MOVING, THE SYNC CONTROL IS CAN’T BE USED. (T Series)

352 SYNCHRONOUS CONTROL AXIS COMPOSITION ERROR. (T Series)

353 THE INSTRUCTION WAS DONE FOR THE AXIS WHICH WAS NOT ABLE TO MOVE. (T Series)

354 THE G28 WAS INSTRUCTED IN WITH THE REF POS NOT FIXED IN SYNC MODE (T Series)

355 PARAMETER OF THE INDEX OF THE COMPOSITE CONTROL AXIS SET ERROR. (T Series)

356 BECAUSE THE AXIS IS MOVING, THE COMP CONTROL IS CAN’T BE USED. (T Series)

357 COMPOSITE CONTROL AXIS COMPOSITION ERROR. (T Series)

359 THE G28 WAS INSTRUCTED IN WITH THE REF POS NOT FIXED IN COMP MODE (T Series)

360 PARAMETER OF THE INDEX OF THE SUPERPOS CONTROL AXIS SET ERROR. (T Series)

361 BECAUSE THE AXIS IS MOVING, THE SUPERPOS CONTROL IS CAN’T BE USED. (T Series)

362 SUPERPOSITION CONTROL AXIS COMPOSITION ERROR. (T Series)

363 THE G28 WAS INSTRUCTED IN TO THE SUPERPOS CONTROL SLAVE AXIS. (T Series)

364 THE G53 WAS INSTRUCTED IN TO THE SUPERPOS CONTROL SLAVE AXIS. (T Series)

365 TOO MANY MAXIMUM SV/SP AXIS NUMBER PER PATH

369 G31 FORMAT ERROR

370 G31P/G04Q ERROR

372 REFERENCE RETURN INCOMPLETE

373 ILLEGAL HIGH-SPEED SKIP SIGNAL

375 CAN NOT ANGULAR CONTROL(SYNC:MIX:OVL)

376 SERIAL DCL: ILLEGAL PARAMETER

412 ILLEGAL G CODE

445 ILLEGAL AXIS OPERATION (T Series)

446 ILLEGAL COMMAND IN G96.1/G96.2/G96.3/G96.4 (T Series)

447 ILLEGAL SETTING DATA

455 ILLEGAL COMMAND IN GRINDING

456 ILLEGAL PARAMETER IN GRINDING

601 ILLEGAL AXIS OPERATION FOR SERVO MOTOR SPINDLE

602 SPINDLE SELECT COMMAND ERROR (SERVO MOTOR SPINDLE)

1001 AXIS CONTROL MODE ILLEGAL

1013 ILLEGAL POS. OF PROGRAM NO.

1014 ILLEGAL FORMAT OF PROGRAM NO.

1016 EOB NOT FOUND

1077 PROGRAM IN USE

1079 PROGRAM FILE NOT FOUND

1080 DUPLICATE DEVICE SUB PROGRAM CALL

1081 EXT DEVICE SUB PROGRAM CALL MODE ERROR

1091 DUPLICATE SUB-CALL WORD

1092 DUPLICATE MACRO-CALL WORD

1093 DUPLICATE NC-WORD & M99

1095 TOO MANY TYPE-2 ARGUMENT

1096 ILLEGAL VARIABLE NAME

1097 TOO LONG VARIABLE NAME

1098 NO VARIABLE NAME

1099 ILLLEGAL SUFFIX [ ]

1100 CANCEL WITHOUT MODAL CALL

1101 ILLEGAL CNC STATEMENT IRT.

1115 READ PROTECTED VARIABLE

1120 ILLEGAL ARGUMENT FORMAT

1124 MISSING DO STATEMENT

1125 ILLEGAL EXPRESSION FORMAT

1128 SEQUENCE NUMBER OUT OF RANGE

1131 MISSING OPEN BRACKET

1132 MISSING CLOSE BRACKET

1133 MISSING ‘=’

1134 MISSING ‘,’

1137 IF STATEMENT FORMAT ERROR

1138 WHILE STATEMENT FORMAT ERROR

1139 SETVN STATEMENT FORMAT ERROR

1141 ILLEGAL CHARACTER IN VAR. NAME

1142 TOO LONG V-NAME (SETVN)

1143 BPRNT/DPRNT STATEMENT FORMAT ERROR

1144 G10 FORMAT ERROR

1160 COMMAND DATA OVERFLOW

1180 ALL PARALLEL AXES IN PARKING T

1196 ILLEGAL DRILLING AXIS SELECTED

1200 PULSCODER INVALID ZERO RETURN

1202 NO F COMMAND AT G93 (M Series)

1223 ILLEGAL SPINDLE SELECT

1298 ILLEGAL INCH/METRIC CONVERSION

1300 ILLEGAL ADDRESS

1301 MISSING ADDRESS

1302 ILLEGAL DATA NUMBER

1303 ILLEGAL AXIS NUMBER

1304 TOO MANY DIGIT

1305 DATA OUT OF RANGE

1306 MISSING AXIS NUMBER

1307 ILLEGAL USE OF MINUS SIGN

1308 MISSING DATA

1329 ILLEGAL MACHINE GROUP NUMBER

1330 ILLEGAL SPINDLE NUMBER

1331 ILLEGAL PATH NUMBER

1332 DATA WRITE LOCK ERROR

1333 DATA WRITE ERROR

1470 G40.1 –G42.1 PARAMETER MISS (M Series)

1508 DUPLICATE M-CODE (INDEX TABLE REVERSING) (M Series)

1509 DUPLICATE M-CODE (SPOS AXIS ORIENTATION) (T Series)

1510 DUPLICATE M-CODE (SPOS AXIS POSITIONING) (T Series)

1511 DUPLICATE M-CODE (SPOS AXIS RELEASE) (T Series)

1533 ADDRESS F UNDERFLOW (G95)

1534 ADDRESS F OVERFLOW (G95)

1537 ADDRESS F UNDERFLOW (OVERRIDE)

1538 ADDRESS F OVERFLOW (OVERRIDE)

1541 S-CODE ZERO

1543 ILLEGAL GEAR SETTING (T Series)

1544 S-CODE OVER MAX

1548 ILLGAL AXIS MODE

1561 ILLEGAL INDEXING ANGLE (M Series)

1564 INDEX TABLE AXIS – OTHER AXIS SAME TIME (M Series)

1567 INDEX TABLE AXIS DUPLICATE AXIS COMMAND (M Series)

Lỗi trên bộ điều khiển Fanuc 0i

1590 TH ERROR

1591 TV ERROR

1592 END OF RECORD

1593 EGB PARAMETER SETTING ERROR (M Series)

1594 EGB FORMAT ERROR (M Series)

1595 ILL-COMMAND IN EGB MODE (M Series)

1596 EGB OVERFLOW (M Series)

1805 ILLEGAL COMMAND

1806 DEVICE TYPE MISS MATCH

1807 PARAMETER SETTING ERROR

1808 DEVICE DOUBLE OPENED

1820 ILLEGAL DI SIGNAL STATE

1823 FRAMING ERROR(1)

1830 DR OFF(2)

1832 OVERRUN ERROR(2)

1833 FRAMING ERROR(2)

1834 BUFFER OVERFLOW(2)

1912 V-DEVICE DRIVER ERROR (OPEN)

1960 ACCESS ERROR (MEMORY CARD)

1961 NOT READY (MEMORY CARD)

1962 CARD FULL (MEMORY CARD)

1963 CARD PROTECTED (MEMORY CARD)

1964 NOT MOUNTED (MEMORY CARD)

1965 DIRECTORY FULL (MEMORY CARD)

1966 FILE NOT FOUND (MEMORY CARD)

1967 FILE PROTECTED (MEMORY CARD)

1968 ILLEGAL FILE NAME (MEMORY CARD)

1969 ILLEGAL FORMAT (MEMORY CARD)

1970 ILLEGAL CARD (MEMORY CARD)

1971 ERASE ERROR (MEMORY CARD)

1972 BATTERY LOW (MEMORY CARD)

1973 FILE ALREADY EXIST

2032 EMBEDDED ETHERNET/DATA SERVER ERROR

2051 #200-#499ILLEGAL P-CODE MACRO COMMON INPUT(NO OPTION)

2052 #500-#549P-CODE MACRO COMMON SELECT(CANNOT USE SETVN)

2053 THE NUMBER OF #30000 IS UNMATCH

2054 THE NUMBER OF #40000 IS UNMATCH

4010 ILLEGAL REAL VALUE OF OBUF :

Lỗi trên bộ điều khiển Fanuc 0i

5006 TOO MANY WORD IN ONE BLOCK

5007 TOO LARGE DISTANCE

5009 PARAMETER ZERO (DRY RUN)

5010 END OF RECORD

5011 PARAMETER ZERO(CUT MAX) (M series)

5014 TRACE DATA NOT FOUND (M series)

5015 NO ROTATION AXIS (M series) (M series)

5016 ILLEGAL COMBINATION OF M CODE

5018 POLYGON SPINDLE SPEED ERROR (T series)

5020 PARAMETER OF RESTART ERROR

5043 TOO MANY G68 NESTING (M series)

5043 TOO MANY G68 NESTING (T series)

5044 G68 FORMAT ERROR (M series)

5044 G68 FORMAT ERROR (T series)

5046 ILLEGAL PARAMETER (ST.COMP)

5050 ILL–COMMAND IN CHOPPING MODE (M series)

5051 M–NET CODE ERROR

5052 M–NET ETX ERROR

5053 M–NET CONNECT ERROR

5054 M–NET RECEIVE ERROR

5055 M–NET PRT/FRT ERROR

5057 M–NET BOARD SYSTEM DOWN

5058 G35/G36 FORMAT ERROR (T series)

5059 RADIUS IS OUT OF RANGE (T series)

5060 ILLEGAL PARAMETER IN G02.3/G03.3 (M series)

5061 ILLEGAL FORMAT IN G02.3/G03.3 (M series)

5062 ILLEGAL COMMAND IN G02.3/G03.3

5063 IS NOT PRESET AFTER REF. (M series)

5064 DIFFERRENT AXIS UNIT (IS–B, IS–C)

5065 DIFFERENT AXIS UNIT (PMC AXIS) (M series)

5067 (HPCC) (M series)

5068 G31 FORMAT ERROR (M series)

5069 WHL–C:ILLEGA P–DATA (M series)

5073 NO DECIMAL POINT

5074 ADDRESS DUPLICATION ERROR

5082 DATA SERVER ERROR

5085 SMOOTH IPL ERROR 1

5096 MISMATCH WAITING M–CODE

5110 NOT STOP POSITION

5110 IMPROPER G–CODE (G05.1 G1 MODE) (M series)

5111 IMPROPER MODAL G–CODE (G05.1 G1) (M series)

5111 IMPROPER MODEL G–CODE (G05.1 G1)

5112 G08 CAN NOT BE COMMANDED (G05.1 G1) (M series)

5112 G08 CAN NOT BE COMMANDED (G05.1 G1)

5113 CAN NOT ERROR IN MDI MODE

5114 NOT STOP POSITION (G05.1 Q1) (M series)

5114 CAN NOT ERROR IN MDI MODE (G05.1)

5115 SPL : ERROR (M series)

5116 SPL : ERROR (M series)

5117 SPL : ERROR (M series)

5118 SPL : ERROR (M series)

5122 ILLEGAL COMMAND IN SPIRAL (M series)

5123 OVER TOLERANCE OF END POINT (M series)

5124 CAN NOT COMMAND SPIRAL (M series)

5131 NC COMMAND IS NOT COMPATIBLE (T Series)

5134 FSSB : OPEN READY TIME OUT

5135 FSSB : ERROR MODE

5136 FSSB : NUMBER OF AMPS IS SMALL

5137 FSSB : CONFIGURATION ERROR

5138 FSSB : AXIS SETTING NOT COMPLETE

5139 FSSB : ERROR

5155 NOT RESTART PROGRAM BY G05

5156 ILLEGAL AXIS OPERATION (M series)

5157 PARAMETER ZERO (M series)

5195 DIRECTION CAN NOT BE JUDGED (T series)

5196 ILLEGAL OPERATION (HPCC) (M series)

5197 FSSB : OPEN TIME OUT

5198 FSSB : ID DATA NOT READ

5199 FINE TORQUE SENSING PARAMETER

5218 ILLEGAL PARAMETER (INCL. COMP)

5219 CAN NOT RETURN

5220 REFERENCE POINT ADJUSTMENT MODE

5222 SRAM CORRECTABLE ERROR

5227 FILE NOT FOUND

5228 SAME NAME USED

5229 WRITE PROTECTED

5231 TOO MANY FILES

5232 DATA OVER–FLOW

5235 COMMUNICATION ERROR

5237 READ ERROR

5238 WRITE ERROR

5242 ILLEGAL AXIS NUMBER (M series)

5243 DATA OUT OF RANGE (M series)

5244 TOO MANY DI ON (M series)

5245 OTHER AXIS ARE COMMANDED (M series)

5251 ILLEGAL PARAMETER IN G54.2 (M series)

5252 ILLEGAL P COMMAND IN G54.2 (M series)

5257 G41/G42 NOT ALLOWED IN MDI MODE (M series)

5300 SET ALL OFFSET DATAS AGAIN

5302 ILLEGAL COMMAND IN G68 MODE

5303 TOUCH PANEL ERROR

5305 ILLEGAL SPINDLE NUMBER

5306 MODE CHANGE ERROR

5307 INTERNAL DATA OVER FLOW (M series)

5311 FSSB:ILLEGAL CONNECTION

5321 S–COMP. VALUE OVERFLOW

5329 M98 AND NC COMMAND IN SAME BLOCK

5346 RETURN TO REFERENCE POINT

5362 CONVERT INCH/MM AT REF-POS

5391 CAN NOT USE G92 (M Series)

5395 CS AXIS NUMBER OVER

5400 SPL:ILLEGAL AXIS COMMAND (M series)

5401 SPL:ILLEGAL COMMAND (M series)

5402 SPL:ILLEGAL AXIS MOVING (M series)

5403 SPL:CAN NOT MAKE VECTOR (M series)

5405 ILLEGAL PARAMETER IN G41.2/ G42.2 (M series)

5406 G41.3/G40 FORMAT ERROR (M series)

5407 ILLEGAL COMMAND IN G41.3 (M series)

5408 G41.3 ILLEGAL START_UP (M series)

5409 ILLEGAL PARAMETER IN G41.3 (M series)

5411 NURBS:ILLEGAL ORDER (M series)

5412 NURBS:NO KNOT COMMAND (M series)

5413 NURBS:ILLEGAL AXIS COMMAND (M series)

5414 NURBS:ILLEGAL KNOT (M series)

5415 NURBS:ILLEGAL CANCEL (M series)

5416 NURBS:ILLEGAL MODE (M series)

5417 NURBS:ILLEGAL MULTI–KNOT (M series)

5418 NURBS:ILLEGAL KNOT VALUE (M series)

5420 ILLEGAL PARAMETER IN G43.4/ G43.5 (M series)

5421 ILLEGAL COMMAND IN G43.4/ G43.5 (M series)

5422 EXCESS VELOCITY IN G43.4/ G43.5 (M series)

5425 ILLEGAL OFFSET VALUE (M series)

5430 ILLEGAL COMMAND IN 3–D CIR (M series)

5432 G02.4/G03.4 FORMAT ERROR (M series)

5433 MANUAL INTERVENTION IN 3–D CIR (M series)

5435 PARAMETER OUT OF RANGE (TLAC) (M series)

5436 PARAMETER SETTING ERROR 1 (TLAC) (M series)

5437 PARAMETER SETTING ERROR 2 (TLAC) (M series)

5440 ILLEGAL DRILLING AXIS SELECTED (M series)

5445 CRC:MOTION IN G39 (M series)

5446 CRC:NO AVOIDANCE (M series)

5447 CRC:DANGEROUS AVOIDANCE (M series)

5448 CRC:INTERFERENCE TO AVD. (M series)

5452 IMPROPER G–CODE (5AXIS MODE) (M series)

5453 NOTE: G68 IS CANCELED (HPCC) (M series)

5455 ILLEGAL ACC. PARAMETER (M series)

Lỗi trên bộ điều khiển Fanuc 0i  Background edit alarm

BP/S alarm – BP/S alarm occurs in the same number as the P/S alarm that occurs in ordinary program edit. (070, 071, 072, 073, 074 085,086,087 etc.)

 

140 BP/S alarm

Lỗi trên bộ điều khiển Fanuc 0i  Absolute pulse coder (APC) alarms

300 n AXIS NEED ZRN

301 APC ALARM:n AXIS COMMUNICATION

302 APC ALARM:n AXIS OVER TIME

303 APC ALARM:n AXIS FRAMING

304 APC ALARM:n AXIS PARITY

305 APC ALARM:n AXIS PULSE MISS

306 APC ALARM:n AXIS BATTERY ZERO

307 APC ALARM:n AXIS BATTERY DOWN 1

308 APC ALARM:n AXIS BATTERY DOWN 2

309 APC ALARM:n AXIS ZRN IMPOSSIBLE

Lỗi trên bộ điều khiển Fanuc 0i  Inductsyn alarms

330 INDUCTOSYN:DATA ALARM

331 INDUCTOSYN:ILLEGAL PRM

Serial pulse coder (SPC) alarms

350 SPC ALARM: n AXIS PULSE CODER

351 SPC ALARM: n AXIS COMMUNICATION

360 n AXIS : ABNORMAL CHECKSUM (INT)

361 n AXIS : ABNORMAL PHASE DATA (INT)

362 n AXIS : ABNORMAL REV.DATA (INT)

363 n AXIS : ABNORMAL CLOCK (INT)

364 n AXIS : SOFT PHASE ALARM (INT)

365 n AXIS : BROKEN LED (INT)

366 n AXIS : PULSE MISS (INT)

367 n AXIS : COUNT MISS (INT)

368 n AXIS : SERIAL DATA ERROR (INT)

369 n AXIS : DATA TRANS. ERROR (INT)

380 n AXIS : BROKEN LED (EXT)

381 n AXIS : ABNORMAL PHASE (EXT LIN)

382 n AXIS : COUNT MISS (EXT)

383 n AXIS : PULSE MISS (EXT)

384 n AXIS : SOFT PHASE ALARM (EXT)

385 n AXIS : SERIAL DATA ERROR (EXT)

386 n AXIS : DATA TRANS. ERROR (EXT)

387 n AXIS : ABNORMAL ENCODER (EXT)

Lỗi trên bộ điều khiển Fanuc 0i Servo Alarms

400 SERVO ALARM: n–TH AXIS OVERLOAD

401 SERVO ALARM: n–TH AXIS VRDY OFF

402 SERVO ALARM: SV CARD NOT EXIST

403 SERVO ALARM: CARD/SOFT MISMATCH

404 SERVO ALARM: n–TH AXIS VRDY ON

405 SERVO ALARM: (ZERO POINT RETURN FAULT)

407 SERVO ALARM: EXCESS ERROR

409 SERVO ALARM: n AXIS TORQUE ALM

410 SERVO ALARM: n–TH AXIS – EXCESS ERROR

411 SERVO ALARM: n–TH AXIS – EXCESS ERROR

413 SERVO ALARM: n–th AXIS – LSI OVERFLOW

414 SERVO ALARM: n–TH AXIS – DETECTION RELATED ERROR

415 SERVO ALARM: n–TH AXIS – EXCESS SHIFT

416 SERVO ALARM: n–TH AXIS – DISCONNECTION

417 SERVO ALARM: n–TH AXIS – PARAMETER INCORRECT

420 SERVO ALARM: n AXIS SYNC TORQUE (M series)

421 SERVO ALARM: n AXIS EXCESS ER (D)

422 SERVO ALARM: n AXIS

423 SERVO ALARM: n AXIS

430 n AXIS : SV. MOTOR OVERHEAT

431 n AXIS : CNV. OVERLOAD

432 n AXIS : CNV. LOW VOLT CONTROL

433 n AXIS : CNV. LOW VOLT DC LINK

434 n AXIS : INV. LOW VOLT CONTROL

435 n AXIS : INV. LOW VOLT DC LINK

436 n AXIS : SOFTTHERMAL (OVC)

437 n AXIS : CNV. OVERCURRENT POWER

438 n AXIS : INV. ABNORMAL CURRENT

439 n AXIS : CNV. OVER VOLT DC LINK

440 n AXIS : CNV. EX DECELERATION POW.

441 n AXIS : ABNORMAL CURRENT OFFSET

442 n AXIS : CNV. CHARGE FAILURE

443 n AXIS : CNV. COOLING FAN FAILURE

444 n AXIS : INV. COOLING FAN FAILURE

445 n AXIS : SOFT DISCONNECT ALARM

446 n AXIS : HARD DISCONNECT ALARM

447 n AXIS : HARD DISCONNECT (EXT)

448 n AXIS : UNMATCHED FEEDBACK ALARM

449 n AXIS : INV. IPM ALARM

453 n AXIS : SPC SOFT DISCONNECT ALARM

456 ILLEGAL CURRENT LOOP

457 ILLEGAL HI HRV (250US)

458 CURRENT LOOP ERROR

459 HI HRV SETTING ERROR

460 n AXIS : FSSB DISCONNECT

461 n AXIS : ILLEGAL AMP INTERFACE

462 n AXIS : SEND CNC DATA FAILED

463 n AXIS : SEND SLAVE DATA FAILED

464 n AXIS : WRITE ID DATA FAILED

465 n AXIS : READ ID DATA FAILED

466 n AXIS : MOTOR/AMP COMBINATION

467 n AXIS : ILLEGAL SETTING OF AXIS

468 HI HRV SETTING ERROR(AMP)

Lỗi trên bộ điều khiển Fanuc 0i Over travel alarms

500 OVER TRAVEL : +n

501 OVER TRAVEL : –n

502 OVER TRAVEL : +n

503 OVER TRAVEL : –n

504 OVER TRAVEL : +n

505 OVER TRAVEL : –n

506 OVER TRAVEL : +n

507 OVER TRAVEL : –n

508 INTERFERENCE: +n (T series (two–path control))

509 INTERFERENCE: –n (T series (two–path control))

510 OVER TRAVEL: +n

511 OVER TRAVEL: –n

514 INTERFERENCE : +n

515 INTERFERENCE : –n

Lỗi trên bộ điều khiển Fanuc 0i Servo alarms

600 n AXIS: INV. DC LINK OVER CURRENT

601 n AXIS: INV. RADIATOR FAN FAILURE

602 n AXIS: INV. OVERHEAT

603 n AXIS: INV. IPM ALARM(OH)

604 n AXIS: AMP. COMMUNICATION ERROR

605 n AXIS: CNV. EX. DISCHARGE POW.

606 n AXIS: CNV. RADIATOR FAN FAILURE

607 n AXIS: CNV. SINGLE PHASE FAILURE

608 n AXIS: INV. COOLING FAN FAILURE

609 n AXIS: INV. RADIATOR FAN FAILURE

610 n AXIS: CNV. COOLING FAN FAILURE

611 n AXIS: CNV. RADIATOR FAN FAILURE

612 n AXIS: CNV. OVERLOAD PSM: Overheat occurred.

613 n AXIS: CNV. SINGLE PHASE FAILURE

641 n AXIS: SPEED DIFFERENCE ALARM

646 n AXIS: ABNORMAL ANALOG SIG.(EXT)

Lỗi trên bộ điều khiển Fanuc 0i Overheat alarms

700 OVERHEAT: CONTROL UNIT

701 OVERHEAT: FAN MOTOR

704 OVERHEAT: SPINDLE

Lỗi trên bộ điều khiển Fanuc 0i Rigid tapping alarms

740 RIGID TAP ALARM : EXCESS ERROR

741 RIGID TAP ALARM : EXCESS ERROR

742 RIGID TAP ALARM : LSI OVER FLOW

Lỗi trên bộ điều khiển Fanuc 0i Serial Spindle Alarms

749 S–SPINDLE LSI ERROR

750 SPINDLE SERIAL LINK START FAULT

751 FIRST SPINDLE ALARM DETECTION (AL–XX)

752 FIRST SPINDLE MODE CHANGE FAULT

754 SPINDLE–1 ABNORMAL TORQUE ALM

762 SECOND SPINDLE MODE CHANGE FAULT

764 SPINDLE–2 ABNORMAL TORQUE ALM

772 SPINDLE–3 MODE CHANGE ERROR

774 SPINDLE–3 ABNORMAL TORQUE ALM

782 SPINDLE–4 MODE CHANGE ERROR

784 SPINDLE–4 ABNORMAL TORQUE ALM

Lỗi trên bộ điều khiển Fanuc 0i System Alarms

900 ROM PARITY

910 SRAM PARITY : (BYTE 0)

911 SRAM PARITY : (BYTE 1)

912 DRAM PARITY : (BYTE 0)

913 DRAM PARITY : (BYTE 1)

914 DRAM PARITY : (BYTE 2)

915 DRAM PARITY : (BYTE 3)

916 DRAM PARITY : (BYTE 4)

917 DRAM PARITY : (BYTE 5)

918 DRAM PARITY : (BYTE 6)

919 DRAM PARITY : (BYTE 7)

920 SERVO ALARM (1–4 AXIS)

921 SERVO ALARM (5–8 AXIS)

924 SERVO MODULE SETTING ERROR

926 FSSB ALARM

930 CPU INTERRUPUT

935 SRAM ECC ERROR

940 PCB ERROR

950 PMC SYSTEM ALARM

951 PMC WATCH DOG ALARM

960 DC24V POWER OFF

970 NMI OCCURRED IN PMCLSI

971 NMI OCCURRED IN SLC

972 NMI OCCURRED IN OTHER MODULE

973 NON MASK INTERRUPT

974 F–BUS ERROR

975 BUS ERROR

976 L–BUS ERROR

Lỗi trên bộ điều khiển Fanuc 0i Safety zone alarms

4500 REPOSITIONING INHIBITED

4502 ILLEGAL COMMAND IN BOLT HOLE

4503 ILLEGAL COMMAND IN LINE AT ANGLE

4504 ILLEGAL COMMAND IN ARC

4505 ILLEGAL COMMAND IN GRID

4506 ILLEGAL COMMAND IN SHARE PROOFS

4507 ILLEGAL COMMAND IN SQUARE

4508 ILLEGAL COMMAND IN RADIUS

4509 ILLEGAL COMMAND IN CUT AT ANGLE

4520 T, M INHIBITED IN NIBBLING-MODE

4521 EXCESS NIBBLING MOVEMENT (X, Y)

4522 EXCESS NIBBLING MOVEMENT (C)

4523 ILLEGAL COMMAND IN CIRCLE-NIBBL

4524 ILLEGAL COMMAND IN LINE-NIBBL

4530 A/B MACRO NUMBER ERROR

4531 U/V MACRO FORMAT ERROR

4532 IMPROPER U/V MACRO NUMBER

4533 U/V MACRO MEMORY OVERFLOW

4534 W MACRO NUMBER NOT FOUND

4535 U/V MACRO NESTING ERROR

4536 NO W, Q COMMAND IN MULTI-PIECE

4537 ILLEGAL Q VALUE IN MULTI-PIECE

4538 W NO. NOT FOUND IN MULTI-PIECE

4539 MULTI-PIECE SETTING IS ZERO

4540 MULTI-PIECE COMMAND WITHIN MACRO

4542 MULTI-PIECE COMMAND ERROR

4543 MULTI-PIECE Q COMMAND ERROR

4544 MULTI-PIECE RESTART ERROR

4600 T, C COMMAND IN INTERPOLATION

4601 INHIBITED T, M COMMAND

4602 ILLEGAL T-CODE

4606 A T COMMAND WAS ISSUED

4650 IMPROPER G-CODE IN OFFSET MODE

4700 PROGRAM ERROR (OT +)

4701 PROGRAM ERROR (OT –)

4702 PROGRAM ERROR (OT +)

4703 PROGRAM ERROR (OT –)

4800 ZONE : PUNCHING INHIBITED 1

4801 ZONE : PUNCHING INHIBITED 2

4802 ZONE : PUNCHING INHIBITED 3

4803 ZONE : PUNCHING INHIBITED 4

4810 ZONE : ENTERING INHIBITED 1 +X

4811 ZONE : ENTERING INHIBITED 1 –X

4812 ZONE : ENTERING INHIBITED 2 +X

4813 ZONE : ENTERING INHIBITED 2 –X

4814 ZONE : ENTERING INHIBITED 3 +X

4815  ZONE : ENTERING INHIBITED 3 –X

4816 ZONE : ENTERING INHIBITED 4 +X

4817 ZONE : ENTERING INHIBITED 4 –X

4830 ZONE : ENTERING INHIBITED 1 +Y

4831 ZONE : ENTERING INHIBITED 1 –Y

4832 ZONE : ENTERING INHIBITED 2 +Y

4833 ZONE : ENTERING INHIBITED 2 –Y

4834 ZONE : ENTERING INHIBITED 3 +Y

4835 ZONE : ENTERING INHIBITED 3 –Y

4836 ZONE : ENTERING INHIBITED 4 +Y

4837 ZONE : ENTERING INHIBITED 4 –Y

4870 AUTO SETTING FEED ERROR

4871 AUTO SETTING PIECES ERROR

4872 AUTO SETTING COMMAND ERROR

 

Trả lời

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Contact Me on Zalo