Fanuc Alarm 9 ILLEGAL ADDRESS INPUT Lỗi Fanuc Alarm 9 sai địa chỉ vào chương trình Fanuc Alarm 9 ILLEGAL ADDRESS INPUT Fanuc Alarm 9 ILLEGAL ADDRESS INPUT Fanuc Alarm DescriptionUnusable character was input in significant area. Modify the program. Applies toFanuc CNC Controls 21 Model B Fanuc Alarm 9 ILLEGAL ADDRESS INPUT
06
Th4
Th4
Fanuc Alarm 7 ILLEGAL USE OF DECIMAL POINT Lỗi Fanuc Alarm 7 sai dấu chấm Fanuc Alarm 7 ILLEGAL USE OF DECIMAL POINT Fanuc Alarm 7 ILLEGAL USE OF DECIMAL POINT Fanuc Alarm DescriptionDecimal point “.” input error (A decimal point was input after an address with which it can not be used. Or two decimal points […]
06
Th4
Th4
Fanuc Alarm 6 ILLEGAL USE OF NEGATIVE SIGN lỗi Fanuc Alarm 6 ký tự không phù hợp Fanuc Alarm 6 ILLEGAL USE OF NEGATIVE SIGN Fanuc Alarm 6 ILLEGAL USE OF NEGATIVE SIGN Fanuc Alarm DescriptionSign “ – ” input error (Sign “ – ” was input after an address with which it cannot be used. […]
06
Th4
Th4
Fanuc Alarm 5 NO DATA AFTER ADDRESS Lỗi Fanuc alarm 5 không có dữ liệu sau địa chỉ Fanuc Alarm 5 NO DATA AFTER ADDRESS Fanuc Alarm 5 NO DATA AFTER ADDRESS Fanuc Alarm DescriptionThe address was not followed by the appropriate data but was followed by another address or EOB code. Modify the program. ORNC word(s) address […]
06
Th4
Th4
Fanuc Alarm 4 ADDRESS NOT FOUND lỗi Fanuc 4 không tìm thấy địa chỉ chương trình Fanuc Alarm 4 ADDRESS NOT FOUND Fanuc Alarm 4 ADDRESS NOT FOUND Fanuc Alarm Description Mô tả lỗi Fanuc alarm 4A numeral or the sign “ – ” was input without an address at the beginning of a block. Modify the program. […]
06
Th4
Th4
Fanuc Alarm 3 TOO MANY DIGITS lỗi chương trình nhiều ký tự Fanuc Alarm 3 TOO MANY DIGITS Fanuc Alarm 3 TOO MANY DIGITS Fanuc Alarm DescriptionData exceeding the maximum allowable number of digits was input. (Refer to the item of max. programmable dimensions.) OR Data entered with more digits than permitted in the NC instruction word. The […]
06
Th4
Th4
Fanuc Alarm 2 TV PARITY ALARM Fanuc Alarm 2 TV PARITY ALARM Fanuc Alarm 2 TV PARITY ALARM Fanuc Alarm DescriptionTV alarm (The number of characters in a block is odd). This alarm will be generated only when the TV check is effective.Fanuc Alarm 2 TV PARITY ALARM
06
Th4
Th4
Fanuc Alarm 1 TH PARITY ALARM Fanuc Alarm 1 TH PARITY ALARM Fanuc Alarm DescriptionTH alarm (A character with incorrect parity was input). Correct the tape.Fanuc Alarm 1 TH PARITY ALARM
18
Th2
Th2
Danh sách Lỗi máy cnc doosan TT Lỗi máy cnc doosan TT và cách khắc phục Alarm Lỗi máy cnc doosan TT 2001 WHETHER EMERGENCY BUTTON IS PRESSED OR OVERTRAVEL OF AXES IS DETECTED, RELEASE EMERGENCY BUTTON AND LIMIT SWITCH FOR OVERTRAVEL CHECK. 2002 THE ALARMS OF THE LEFT SPINDLE MOTOR AND SERVO UNIT DETECTED, […]
18
Th2
Th2
Lỗi máy cnc doosan mx Danh sách lỗi Lỗi máy cnc doosan mx Alarm No. Lỗi máy cnc doosan mx 2001 WHETHER EMERGENCY BUTTON IS PRESSED OR OVERTRAVEL OF AXES IS DETECTED, RELEASE EMERGENCY BUTTON AND LIMIT SWITCH FOR OVERTRAVEL CHECK. 2002 THE ALARMS OF THE MAIN SPINDLE MOTOR AND SERVO UNIT DETECTED, CHECK ALARM […]
- 1
- 2
