Doosan TT Series M Code List
Hướng dẫn vận hành lập trình máy CNC Doosan TT Series M Code List
| M-CODE | UPPER UNIT | LOWER UNIT |
|---|---|---|
| M00 | U-PROGRAM STOP | L-PROGRAM STOP |
| M01 | U-OPTIONAL STOP | L-OPTIONAL STOP |
| M02 | U-PROGRAM END | L-PROGRAM END |
| M03 | U-LEFT SPINDLE FORWARD | L-LEFT SPINDLE FORWARD |
| M04 | U-LEFT SPINDLE REVERSE | L-LEFT SPINDLE REVERSE |
| M05 | U-LEFT SPINDLE STOP | L-LEFT SPINDLE STOP |
| M06 | U-COOL JET ON | L-COOL JET ON |
| M07 | U-COOLANT FLUSING ON | L-COOLANT FLUSING ON |
| M08 | U-COOLANT ON | L-COOLANT ON |
| M09 | U-COOLANT OFF | L-COOLANT OFF |
| M10 | U-LEFT PARTS CATCHER RECEIVE ADV. | L-LEFT PARTS CATCHER RECEIVE ADV. |
| M11 | U-LEFT PARTS CATCHER RECEIVE RET. | L-LEFT PARTS CATCHER RECEIVE RET. |
| M12 | U-LEFT COOLANT BLOWER ON | L-LEFT COOLANT BLOWER ON |
| M13 | U-LEFT COOLANT BLOWER OFF | L-LEFT COOLANT BLOWER OFF |
| M14 | U-LEFT SPINDLE AIR BLOW ON | L-LEFT SPINDLE AIR BLOW ON |
| M15 | U-LEFT SPINDLE AIR BLOW OFF | L-LEFT SPINDLE AIR BLOW OFF |
| M16 | U-COOLANT FLUSING OFF | L-COOLANT FLUSING OFF |
| M17 | U-M/C LOCK ACT | L-M/C LOCK ACT |
| M18 | U-M/C LOCK CANCEL | L-M/C LOCK CANCEL |
| M19 | U-LT SPINDLE ORIENTATION | L-LT SPINDLE ORIENTATION |
| M21 | U-OPTIONAL BLOCK SKIP ON | L-OPTIONAL BLOCK SKIP ON |
| M22 | U-OPTIONAL BLOCK SKIP CANCEL | L-OPTIONAL BLOCK SKIP CANCEL |
| M24 | U-CHIP CONVEYOR START | L-CHIP CONVEYOR START |
| M25 | U-CHIP CONVEYOR STOP | L-CHIP CONVEYOR STOP |
| M28 | U-POLYGON MODE ON | L-POLYGON MODE ON |
| M29 | U-RIGID TAPPING ON | L-RIGID TAPPING ON |
| M30 | U-PROGRAM END & REWIND | L-PROGRAM END & REWIND |
| M31 | U-LT SPINTERLOCK BY PASS(SPDL.T/S) | L-LT SPINTERLOCK BY PASS(SPDL.T/S) |
| M33 | U-REV.SPINDLE FORWARD | L-REV.SPINDLE FORWARD |
| M34 | U-REV.SPINDLE REVERSE | L-REV.SPINDLE REVERSE |
| M35 | U-REV.SPINDLE STOP OR REV. SPINDLE(C1-AXIS) SELECTION | L-REV.SPINDLE STOP OR REV. SPINDLE(C1-AXIS) SELECTION |
| M46 | ||
| M47 | ||
| M50 | U-BAR FEEDER COMMAND 1 | L-BAR FEEDER COMMAND 1 |
| M51 | U-BAR FEEDER COMMAND 2 | L-BAR FEEDER COMMAND 2 |
| M52 | U-SPLASH GUARD DOOR OPEN | L-SPLASH GUARD DOOR OPEN |
| M53 | U-SPLASH GUARD DOOR CLOSE | L-SPLASH GUARD DOOR CLOSE |
| M54 | U-PARTS COUNT | L-PARTS COUNT |
| M55 | U-PROGRAM RESTART ON | L-PROGRAM RESTART ON |
| M56 | U-TAPPING MODE SELECT | L-TAPPING MODE SELECT |
| M57 | U-TAPPING MODE CANCEL | L-TAPPING MODE CANCEL |
| M60 | U-TOOL INDEX & AXIS MOVE | L-TOOL INDEX & AXIS MOVE |
| M61 | U-LEFT WINDING CHANGE M-CODE(LOW) | L-LEFT WINDING CHANGE M-CODE(LOW) |
| M62 | U-LEFT WINDING CHANGE M-CODE(HIGH) | L-LEFT WINDING CHANGE M-CODE(HIGH) |
| M63 | U-LT SP. FORWARD & COOLANT ON | L-LT SP. FORWARD & COOLANT ON |
| M64 | U-LT SP. REVERSE & COOLANT ON | L-LT SP. REVERSE & COOLANT ON |
| M65 | U-LT SP.STOP & COOLANT OFF | L-LT SP.STOP & COOLANT OFF |
| M68 | U-LEFT CHUCK CLAMP | L-LEFT CHUCK CLAMP |
| M69 | U-LEFT CHUCK UNCLAMP | L-LEFT CHUCK UNCLAMP |
| M72 | U-REV.SPINDLE DIR. CONVERT | L-REV.SPINDLE DIR. CONVERT |
| M73 | U-REV.SPDL DIR. CONVERT CANCEL | L-REV.SPDL DIR. CONVERT CANCEL |
| M74 | U-ERROR DETECT ON | L-ERROR DETECT ON |
| M75 | U-ERROR DETECT OFF | L-ERROR DETECT OFF |
| M76 | U-CHAMFERING ON | L-CHAMFERING ON |
| M77 | U-CHAMFERING OFF | L-CHAMFERING OFF |
| M78 | ||
| M79 | ||
| M80 | U-Q SETTER DOWN COMMAND | L-Q SETTER DOWN COMMAND |
| M81 | U-Q SETTER UP COMMAND | L-Q SETTER UP COMMAND |
| M84 | U-TURRET CW ROTATION | L-TURRET CW ROTATION |
| M85 | U-TURRET CCW ROTATION | L-TURRET CCW ROTATION |
| M86 | U-TORQUE LIMIT SKIP ON | |
| M87 | U-TORQUE LIMIT SKIP CANCEL 1 | |
| M88 | U-LEFT SPINDLE LOW CLAMP | L-LEFT SPINDLE LOW CLAMP |
| M89 | U-LEFT SPINDLE HIGH CLAMP | L-LEFT SPINDLE HIGH CLAMP |
| M90 | U-LEFT SPINDLE UNCLAMP | L-LEFT SPINDLE UNCLAMP |
| M91 | U-EXTERNAL M91 | L-EXTERNAL M91 |
| M92 | U-EXTERNAL M92 | L-EXTERNAL M92 |
| M93 | U-EXTERNAL M93 | L-EXTERNAL M93 |
| M94 | U-EXTERNAL M94 | L-EXTERNAL M94 |
| M98 | U-SUB PROGRAM CALL | L-SUB PROGRAM CALL |
| M99 | U-PROGRAM END or RE-START | L-PROGRAM END or RE-START |
| M103 | U-RIGHT SPINDLE FORWARD | L-RIGHT SPINDLE FORWARD |
| M104 | U-RIGHT SPINDLE REVERSE | L-RIGHT SPINDLE REVERSE |
| M105 | U-RIGHT SPINDLE STOP | L-RIGHT SPINDLE STOP |
| M108 | U-THROUGH THE SPINDLE COOALNT ON | L-THROUGH THE SPINDLE COOALNT ON |
| M109 | U-THROUGH THE SPINDLE COOALNT OFF | L-THROUGH THE SPINDLE COOALNT OFF |
| M112 | U-RIGHT COOLANT BLOWER ON | L-RIGHT COOLANT BLOWER ON |
| M113 | U-RIGHT COOLANT BLOWER OFF | L-RIGHT COOLANT BLOWER OFF |
| M114 | U-RIGHT SPINDLE AIR BLOW ON | L-RIGHT SPINDLE AIR BLOW ON |
| M115 | U-RIGHT SPINDLE AIR BLOW OFF | L-RIGHT SPINDLE AIR BLOW OFF |
| M116 | U-WORK EJECTOR ADVANCE | L-WORK EJECTOR ADVANCE |
| M117 | B-AXIS TROQUE CONROL ON | L-Z2 AXIS TROQUE CONROL ON |
| M118 | B-AXIS TROQUE CONROL CANCEL | L-Z2 AXIS TROQUE CONROL CANCEL |
| M119 | U-RT SPINDLE ORIENTATION | L-RT SPINDLE ORIENTATION |
| M131 | U-RT SPINTERLOCK BY PASS(SPDL.T/S) | L-RT SPINTERLOCK BY PASS(SPDL.T/S) |
| M135 | U-REV.SPINDLE STOP OR REV. SPINDLE(C2-AXIS) SELECTION | L-REV.SPINDLE STOP OR REV. SPINDLE(C2-AXIS) SELECTION |
| M161 | U-RIGHT WINDING CHANGE M-CODE(LOW) | L-RIGHT WINDING CHANGE M-CODE(LOW) |
| M162 | U-RIGHT WINDING CHANGE M-CODE(HIGH) | L-RIGHT WINDING CHANGE M-CODE(HIGH) |
| M163 | U-RIGHT SP. FORWARD & COOLANT ON | L-RIGHT SP. FORWARD & COOLANT ON |
| M164 | U-RIGHT SP. REVERSE & COOLANT ON | L-RIGHT SP. REVERSE & COOLANT ON |
| M165 | U-RT SP.STOP & COOLANT OFF | L-RT SP.STOP & COOLANT OFF |
| M168 | U-RIGHT CHUCK CLAMP | L-RIGHT CHUCK CLAMP |
| M169 | U-RIGHT CHUCK UNCLAMP | L-RIGHT CHUCK UNCLAMP |
| M170 | U-UPPER TURRET INTERFEARNCE CHECK OFF | |
| M171 | U-UPPER TURRET INTERFEARNCE CHECK ON | |
| M186 | PART UNLOADER INTERLOCK CANCEL (ONLY TT15/18) | |
| M187 | PART UNLOADER INTERLOCK CANCEL OFF (ONLY TT15/18) | |
| M188 | U-RIGHT SPINDLE LOW CLAMP | L-RIGHT SPINDLE LOW CLAMP |
| M189 | U-RIGHT SPINDLE HIGH CLAMP | L-RIGHT SPINDLE HIGH CLAMP |
| M190 | U-RIGHT SPINDLE UNCLAMP | L-RIGHT SPINDLE UNCLAMP |
| M192 | U-SYN. FEEDRATE CONTROL ON | L-SYN. FEEDRATE CONTROL ON |
| M193 | U-SYN. FEEDRATE CONTROL OFF | L-SYN. FEEDRATE CONTROL OFF |
| M195 | U-RIGHT SPINDLE P.C USE | L-LEFT SPINDLE P.C USE |
| M196 | U-RIGHT SPINDLE P.C RETURN | L-LEFT SPINDLE P.C RETURN |
| M200 | U-TOOL MONITOR OFF | L-TOOL MONITOR OFF |
| M201 | U-TOOL MONITOR ON | L-TOOL MONITOR ON |
| M203 | U-SPEED SYN. CONTROL FORWARD | L-SPEED SYN. CONTROL FORWARD |
| M204 | U-SPEED SYN. CONTROL REVERSE | L-SPEED SYN. CONTROL REVERSE |
| M205 | U-SYN. CONTROL STOP | L-SYN. CONTROL STOP |
| M206 | U-SYN. CONTROL RELEASE | L-SYN. CONTROL RELEASE |
| M208 | U-SYN. PHASE OK | L-SYN. PHASE OK |
| M209 | U-SYN. SPEED & ARRIVAL OK | L-SYN. SPEED & ARRIVAL OK |
| M211 | U-C AXIS COMPOSITION ON | L-C AXIS COMPOSTION ON |
| M212 | U-C AXIS COMPOSITION OFF | L-C AXIS COMPOSTION OFF |
| M213 | U-SPEED&PHASE SYN. CONTROL FWD. | L-SPEED&PHASE SYN. CONTROL FWD. |
| M214 | U-SPEED&PHASE SYN. CONTROL RVS. | L-SPEED&PHASE SYN. CONTROL RVS. |
| M215 | U-UPPER TURRET UNCLAMP | L-LOWER TURRET UNCLAMP |
| M226 | U-WORK EJECTER ADVANCE | U-WORK EJECTER ADVANCE |
| M227 | U-WORK EJECTER RETRACT | U-WORK EJECTER RETRACT |
| M230 | U-PTC STOPPER RET. | L-PTC STOPPER RET. |
| M231 | U-PTC STOPPER ADV. | L-PTC STOPPER ADV. |
| M232 | U-PTC BODY ADV. | L-PTC BODY ADV. |
| M233 | U-PTC BODY RET. | L-PTC BODY RET. |
| M234 | U-PTC BUCKET ADV. | L-PTC BLCKET ADV. |
| M235 | U-PTC BUCKET RET. | L-PTC BLCKET RET. |
| M236 | U-PTC ARM ADV. | L-PTC ARM ADV. |
| M237 | U-PTC ARM RET. | L-PTC ARM RET. |
| M252 | U-TOOL CHANGE INTERLOCK OFF | L-TOOL CHANGE INTERLOCK OFF |
| M253 | U-TOOL CHANGE INTERLOCK ON | L-TOOL CHANGE INTERLOCK ON |
| M254 | U- CHUK CLAMP MOVE INTERLOCK RELEASE | L- CHUK CLAMP MOVE INTERLOCK RELEASE |
| M255 | U- CHUK CLAMP MOVE INTERLOCK ON | L- CHUK CLAMP MOVE INTERLOCK ON |
| M256 | U- PARTS UNLOADER CONTINUOUS OPERATION | L- PARTS UNLOADER CONTINUOUS OPERATION |
| M289 | U- LEFT SPINDLE HIGH CLAMP CONTROL | L- LEFT SPINDLE HIGH CLAMP CONTROL |
| M389 | U-RIGHT SPINDLE HIGH CLAMP CONTROL | L-RIGHT SPINDLE HIGH CLAMP CONTROL |
| M310 | U-RIGHT PARTS CATCHER RECEIVE ADV. | L-RIGHT PARTS CATCHER RECEIVE ADV. |
| M311 | U-RIGHT PARTS CATCHER RECEIVE RET. | L-RIGHT PARTS CATCHER RECEIVE RET. |
| M315 | U-LEFT SPINDLE STOP(NOT CONFIRM) | L-LEFT SPINDLE STOP(NOT CONFIRM) |
| M318 | U-CHUCK UNCLAMP & WORK EJECTOR ON (ONLY TT15/18) | L-CHUCK UNCLAMP & WORK EJECTOR ON (ONLY TT15/18) |
| M325 | U-RIGHT SPINDLE STOP(NOT CONFIRM) | L-RIGHT SPINDLE STOP(NOT CONFIRM) |
| M900 | U-WAITING M-CODE (M900~M999) | L-WAITING M-CODE (M900~M999) |
