Máy cắt dây CNC Aristech

Giới thiệu Máy cắt dây CNC Aristech Đài Loan

Tính năng:

• Điều khiển đa chức năng :
  1.By inputting the wire diameter , work piece material & thickness , and desired surface finish , optimum
  cutting conditions are automatically generated from memory.
  2.It is possible to carryout the machining conditions of second, third, fourth cutting; the second cutting easily obtained by using the retrace function.
   
• Nối dây khi bị đứt WIRE BREAKAGE RECOVERY:
  1.In case of wire breakage during machining, just press button and wire returns to start point.By ressing button , wire will move rapidly retracing machining path back to that point.
  
• Điều khiển nước làm mát WATER COOLING CONTROL:
  1.The inverter control for pump and water coolant unit keep the thermal balance on every part of the machine and lowexpansion of material in submerged machining.
  
• Cấp dây tự động WIRE FEEDING:
  1.Operator has only to pass wire through lower nozzle guide and wire will be taken by the water-jet wire-collecting device to the collector.
  2. Equipped power mos-transistor circuit system. max. out-put current 25 ampere .
• Hộp điều khiển từ xa REMOTE CONTROL BOX:
  1.For the convenience of operator , the remote control box contains many of the functions required for set-up.
  2.PC-base designed, CNC Controller with IPC, used G.M. NC-code edit. standard with CF CARD and RS-232c interface.

Các tính năng CNC CNC FUNCTION :

Phụ kiện tiêu chuẩn đi kèm máy STANDARD ACCESSORIES

1. Automatic vertical alignment jig 2. Wire guider(0.25mm) & Wire 3. Water filtering system 4. Remote controller 5. Tool box

1 set 1 set 1 set 1 set 1 set

Phụ kiện lựa chọn thêm cho máy OPTIONAL ACCESSORIES ：

Thông số kỹ thuật của máy MACHINE UNIT SPECIFICATION ：

(Specifications subject to change without notice)

LOẠI MÁY	Máy cắt dây CNC Aristech CW-10	Máy cắt dây CNC Aristech CW-30	Máy cắt dây CNC Aristech CW-40	Máy cắt dây CNC Aristech CW-50	Máy cắt dây CNC Aristech CW-70
Machining method	Submerged or Flushing
Kích thước phôi lớn nhất Max.workpiece size (WxDxH)(mm)	680x420x150	780x500x250	880x500x250	1,000x690x300	1,200x790x300
Trọng lượng phôi lớn nhất Max. workpiece weight	250kg	500kg	550kg	800kg	1,000kg
Hành trình X,Y axes travel	300×200(mm)	400×300(mm)	500×300(mm)	600×400(mm)	800×500(mm)
Hành trình  Z axis travel	150(mm)	250(mm)	250(mm)	300(mm)	300(mm)
Hành trình  U,V axes travel	30x30(mm)	50×50(mm)	50×50(mm)	60×60(mm)	60×60(mm)
Tốc độ di chuyển X-Y axis feed rate	Max. 900mm/min
Động cơ Drive motor (X, Y, U, V)	AC Servo Motor
Đường kính dây Wire diameter (standard)	ø0.25mm(ø0.15 – 0.3)
Sức căng dây Wire tension	200-2500gf
Wire feeding speed	0-15m/min
Best surface roughness	Ra0.65m
Max. taper angle	15°/80
Max.wire bobbin weight	6kg	6kg	6kg	10kg	10kg
Work tank inner dimensios (WxDxH)(mm)	(S)850x573x375 (F)920x573x400	(S)970x719x510 (F)1040x719x450	(S)1070x719x480 (F)1140x719x450	(S)1136x900x530 (F)1272x862x480	1492x972x480
Machine weight	1500kg	2200kg	2400kg	2800kg	4100kg

Nguồn cấp nước DIELECTRIC FLUID SUPPLY UNIT (FILTERING UNIT)：

ITEM	CW-10	CW-30	CW-40	CW-50	CW-70
Filter tank capacity(liter)	480/420	690/420	830/420	1215/420	420
Filter element	Paper filters
lon exchange resin	15
Conductivity control	Standard
Fluid temperature control	Auto
Outside dimension (WxHxD)(mm)	(S)1100x1400x1290 (F)950x1400x1290	(S)1100x1570x1290 (F)950x1400x1290	(S)1150x1820x1360 (F)950x1400x1290	(S)1200x1800x1470 (F)950x1400x1290	950x1400x1290
Net weight	200kg	250kg	260kg	280kg	280kg

CNC CONTROL UNIT
I/O device	Keyboard, RS-232C, CF CARD
Display type	15″ LCD-TFT
Control system	IPC, close loop software servo system
Control axis	X, Y, Z, U, V, (5 axes)
Setting unit	0.001mm
Max. command value	9999.999mm
Interpolation	Linear/Circular
Command system	Abs./lnc.
Machining feed control	Servo/Const. Feed
scaling	0.001-999.999
Auto 2nd cut system	Re-trace and auto changed machining data
Machining condition memory	0-255
Outside dimensions(WxDxH)	600x870x1850mm
Total AC power input	3ø220V 10％ / 13 KVA

Quay lại mục Máy công cụ